Project tutorials
Practical starting points for electronics projects.
Start with an ESP32 board
Install the Arduino IDE and the Espressif ESP32 board package. Connect the development board with a USB data cable, select the correct board and serial port, then upload a simple serial-output example. ESP32 GPIO uses 3.3 V logic: do not connect a 5 V signal directly to a GPIO. Check the exact board documentation before wiring.
Choose a capacitor correctly
Read the capacitance, voltage rating and polarity markings. Tantalum capacitors are polarized: confirm the marked positive terminal against the datasheet and circuit before applying power. Choose a suitable voltage rating and derating for the circuit. Disconnect power and discharge capacitors before changing components.
Troubleshoot a new circuit
Start with the supply disconnected. Compare every connection with your schematic, check polarity and inspect for short circuits. Use a current-limited low-voltage supply for initial testing. Measure the supply rails before connecting a microcontroller and add one module at a time. Keep mains-powered work separate from beginner breadboard projects.